What size nails do you use for hardie siding? However, it’s best to use a pneumatic nailer for speed and consistency. Framing nailers are suitable for use to install hardie wood sidings.
You Can Shoot Hardie Siding On With Air Powered Nailers Or Use Hand Driven Roofing Nails To Attach Siding To The Home Or Structure.
Other than that, they come with a superior hot dipped galvanized finish. You probably know that stainless nails are more readily available than. You can either nail by hand or use a pneumatic nailer.
The Best Type Of Nail Guns For Hardie Siding And Trim Are Called Pneumatic Nail Guns.
However, it’s best to use a pneumatic nailer for speed and consistency. If the nails won’t show then a roofing nailer will work too. Framing nailers are suitable for use to install hardie wood sidings.
Also, Make Sure You Have The Right Nail Gun For Driving That Size Of Nails.
What kind of nails do you use for hardie board siding. Nails should penetrate through the sheathing and at least 1 into studs. From the ends of the plank.
What Size Nails Do You Use For Hardie Siding?
Fasteners must be corrosion resistant, galvanized or stainless steel. The end of each plank making up a butt joint needs to be fastened to a stud. Down from the top edge at each stud, no more than 16 in.
The Sizing Of These Nails Is Perfect For The Fiber Cement Thickness That Varies Within 4.5 To 18Mm.
Fastener heads should be snugged up against the siding, not driven into the surface. These are mostly made of stainless steel so they can be used on hardie board siding. Drive nails flush with face of hardie plank but don't counter sink nail.
